Camcorder Battery
Camcorder Battery are made from the highest quality parts, the Battery are tailored made according to the original size, whether the Battery appearance, size and quality are the same as with the original. Every Battery should be under strict quality control including filtration and safety testing of voltage,capacity and Battery core before leaving the factory, and has passed the authentication of CE, UL, EMC, CQC, ROHS, etc.
Featured Products
Special Products
Camcorder Battery Using Guide
Camcorders rely mainly on battery power, so there are many places you should pay attention to about battery save and carry.
- If you are not using a matchable Camcorder battery, or not pay attention to save the battery, the battery will run out when you just take a few photos. So we should try to save battery usage. Flash is a very power-hungry, it is recommended you do not abuse them. When adjusting the image it is best to use the viewfinder instead of the LCD display. The LCD display power consumption is astonishing, so it's best to use fewer. Of course, it would not be blocked in order to save power, such as when shooting at close range, LCD display is an indispensable and important component. Finally, remember turn it off when you do not use Camcorders.
- Majority of people do not pay too much attention to the clean of the Camcorder battery. Before charging, please use a soft dry cloth to clean the contact points at both ends of the battery and keep them clean, in this ensures that the battery can be completely sufficient power. If the battery's electrodes occurs oxidation, you need to wipe it out, when severe oxidation or drop, you should change the battery.
- Other details should also pay sufficient attention to, the rechargeable Camcorder battery you just bought are generally very low or no battery power, and you should charge before use. After fully charged the battery is very hot, it should be cooled and then put into the Camcorder. Pay attention to the integrity of the battery insulating paper, once they are damaged, you should cement it with a trubberized fabric. When you don't use the Camcorder in a long time, you must taken out the battery from the Camcorder or battery charger, and let its fully discharged, then stored in a dry, cool environment, but do not with metal objects. Because the Camcorder battery stored in the Camcorder or charger for a long time may result in leakage, and damage and so on.
- Using the original charger and battery also will help to extend battery life. If it's the first time using the battery(or not used for several months), please remember the lithium battery charging hours must be more than 6 hours, Ni-MH battery for Camcorder must be more than 14 hours, otherwise the battery life is shorter in future. Only after several charge / discharge process the battery can achieve an optimal efficiency. And try not to repeat the charge to ensure camcorder battery life when there still remnants of power in the Camcorder battery.
Change Currency
$32.99 Today:$30.99
Save: 6% off
